Desoldered broken ear connector and probably caused even more damage

[ccvh]

I bought a broken Tonie box for tinkering. It seems, that the beforehand owner tried to tinker as well: there were signs of soldering as I opened the box and looked at the non functioning ear connector. I tried to completely unsolder the terminal and ripped apart the underlying connection from R56 to the terminal. Is this reparable at all?

Thanks in advance

[0xbadbee]

No sound when pressing the ears - pin defects on PCB

The toniebox is 4 or 5 layered [image] The ground of the ears lies under the connector and goes to R56. So please first of all check if the middle pin of the ear connector is connected to ground (red) If the vias isn’t contacted any more, this may help. But be sure you are only connecting things that should be connected. The toniebox-pcb repo may help you with the TPs.