Charging with an USB-C charger (PD)?

Toniebox Hardware Hardware General
1

Hi all,

only one question. is it possible to charge the box with an USB-C Charger (PD). or will I risk my box because the IC can’t communicate with the PD protocol?
Sure I need to make an adapter from USB-C to the round one. but that would be smaller than the original charger. :slight_smile:

Regards
marcel

2

You’ll need something like this https://learn.adafruit.com/adafruit-husb238-usb-type-c-power-delivery-breakout/overview

because without negotiating the output voltage of the charger you won’t get the 9V the Toniebox expects