W-LAN reach is down; Edit: problem found on WIFI Channel

Edit 2: It was working for a short while. But now i know the solution. My WIFI was set on automatic channel. It chooses channel 13. After i told to manualy use channel 1 instead it is working fine again.

Edit: The problem was for shure on my router. After my Laptop also lose connection i’ve done a complete reset, now it works again perfectly fine.

Hello all

After i used the toniebox without any problems before the battery was low, i was not able to connect wo wifi after one minute of charging. when i place the toniebox directly on my router, i have wifi. but a few steps away, about one or two meters, the toniebox lose connection. with all my other devices, there is no problem. Also i have no problem with connecting to the toniebox from my laptop (after pressing both ears for 5 sec). And the toniebox recieves other w-lan from far away. i set the router to 2.4ghz only, but no difference.
Mods: Teddycloud with hacked firmware and bluetooth mod.

I also checked the board with my microscope on visible problems on the antenna, can’t find anything. It’s also special, that the tooniebox sees other wifi from far away. the only thing i did, was change password of the wifi. maybe there are now two wifi with same ssid and different passwords? but why does it work when near the router. i also do not think, that the router is the problem, i also started it new. my computer have good connection to the router from the distance. maybe i need to flash the firmware again?

Thanks for help

Greetings from switzerland
NASCarl

IIRC there were some problems caused by the Bluetooth mod.

Edit: the problem was another. So no idea.

1 Like