How do I connect to the wifi?

apromixately · January 23, 2024, 10:18am

I’ve copied the ofw 3 times and the latest cfw 2 times to my SD card. I switched the waitForPress and waitForBoot to true to see if things seems to be working because my big ear is flakey.

When I power the box and hold the big ear (and get lucky) I can press the small ear until I get a single blinking blue light. When I let go of the big ear I get the color cycle for the waitForBoot (I think), pressing again now gives me some kind of rainbow color cycle.

Is this all as it should be? How do I configure the wifi so I can connect to the box?

0xbadbee · January 23, 2024, 10:21am

Reinsert the sd card and run the cfw once. Then shutdown the box again (put the box onto the front where the speaker/tonie logo is and press both ears for 10s). Then remove the sd card again and add your wifi credentials to the created “/revvox/hackiebox.config.json” config file.

Beware that it will overwrite your stored settings on the box.

See GitHub - toniebox-reverse-engineering/hackiebox_cfw: Custom firmware for the Toniebox based on the CC3200

Did you set this on purpose? It is not set by default.

apromixately · January 23, 2024, 10:23am

Did you set this on purpose? It is not set by default.

No, maybe somebody changed the default?

0xbadbee · January 23, 2024, 10:25am

No, default is off

github.com

toniebox-reverse-engineering/hackiebox_cfw_ng/blob/master/sd-bootloader-ng/bootmanager/sd/revvox/boot/ngCfg.json

{
    "general": {
        "activeImg": "ofw1",
        "_descWaitForPress": "Waits for an earpress on startup",
        "waitForPress": false,
        "_descWaitForBoot": "Waits for an earpress before firmware boot",
        "waitForBoot": false,
        "waitTimeoutInS": 60,
        "_descMinBatteryLevel": "Divide through 2785 to get voltage",
        "minBatteryLevel": 8869,
        "ofwFixFlash": "/sys/pre-img.bin",
        "_descSerialLog": "Logging only works with the debug build!",
        "serialLog": false,
        "_descLogLevel": "0:Trace - 5:Fatal",
        "logLevel": 0,
        "_descLogColor": "Use colors in log output",
        "logColor": false
    },
    "ofw1": {
        "checkHash": false,

This file has been truncated. show original

github.com

toniebox-reverse-engineering/hackiebox_cfw_ng/blob/2b00ddb8b4d672fe4ae091d5c0b53f23c6bdd865/sd-bootloader-ng/bootmanager/config.c#L8


      
          #include "config.h"
          #include <stdlib.h> 
          #include "logger.h"
          
          sGeneralSettings Config_generalSettings = {
            0,      //activeImage
            false,  //waitForPress
            false,  //waitForBoot
            60,     //waitTimeoutInS
            8869,   //minBatteryLevel (Divide through 2785 to get voltage, so 3.18V should be save)
            0x0010014C, //ofwFixValue - Magic bytes from OFW BL
            "\0",   //ofwFixFlash
            #ifdef NO_DEBUG_LOG
            false,  //serialLog
            #else
            true,  //serialLog
            #endif
            DEBUG_LOG_LEVEL,

apromixately · January 23, 2024, 10:28am

Sorry, I misunderstood. Yes, I turned on wait for boot.

Then after that I get, it seems some pink, then green blinking, a bit of blue blinking and then the rainbow color cycle.

0xbadbee · January 23, 2024, 10:33am

Yes this is the CFW.

0xbadbee · August 31, 2024, 12:30pm

A post was split to a new topic: How to start the CFW?