Can SOP2 be connected to VCC permanently?

Toniebox Hardware CC3200 (V1, V2)
3

If you do it like me, you can pull SOP2 high with the UART:

IMG_20240122_214422_787
IMG_20240122_214422_7871280×813 173 KB

When the CP2102 or FT232RL is connected, the SUP2 gets pulled HIGH, so no need for manually set bridges.
Also always append “—reset dtr” to your command (right after defining the port) (e.g. cc3200tool -p COM3 —reset dtr read_file /cert/ca.der cert/ca.der)